All classes of Trials, Challenge Events. Also includes Point to Point if in SRs

Reg 56.2.3 Be equipped with mudguards for all wheels which present no sharp edges and cover the complete wheel(flange+rim+tyre) around an arc of 120 degrees.The minimum coverage must :-

a) be achieved with continuous surface of rigid material within which ventilation louvres may be fitted .The tyre must not be visible when viewed from above.

b) extend forward ahead of the axle line

c) extend downward behind the wheel

Drawing By Neil Whitford

  Also refer to MSA Blue Book (P) Cross Country Events page 249 o MSA material specification requirements

BS4T45 to BS4T100

Fully certified British made tube

S515 SHEET

New Stocks